Tips For The Working Process; Use Of Battery - FUXTEC FX-E1HLP20 Mode D'emploi Original

Original-Bedienungsanleitung FUXTEC 20V Akku-Hochdruckreiniger FX-E1HDR20_de_en_fr_it_rev1

Tips for the working process

You can connect the end of the hose to the water supply in your house or place it in a water
container (e.g. a rain barrel). When using a water container, please note that only the end of the
hose is in the water without a connector.

Use of battery

Only use original FUXTEC lithium-ion batteries with the voltage indicated on the type plate of your
power tool.
Using other batteries may cause injury and fire. Hint: Using batteries that are not suitable for the
machine may cause malfunction or damage to the power tool.
The charged battery must be inserted into the socket of the power tool until it clicks into place and is
securely locked.
Note: The lithium-ion battery is protected against deep discharge by the "Electronic Cell Protection
(ECP)." If the battery is empty, the machine is switched off by a safety device. The saw blade then no
longer moves. In this case, do not press the on/off switch repeatedly. This may damage the battery.
30