Introduction And Safety; Intended Use; General Safety Instructions For Power Tools; Workplace Safety - FUXTEC FX-E1HLP20 Mode D'emploi Original

Original-Bedienungsanleitung FUXTEC 20V Akku-Hochdruckreiniger FX-E1HDR20_de_en_fr_it_rev1

Introduction and safety

Never allow children or persons unfamiliar with these instructions to use the garden device. Children
should be supervised to ensure that they do not play with the appliance.

Intended use

This device is intended exclusively for sawing materials in the private sector. The appropriate
accessories for the respective material are absolutely necessary.
The device must be used following the descriptions
The device must be used following the descriptions and safety instructions given in this user manual.
Unauthorized use will invalidate the warranty and override any responsibility on the part of the
manufacturer. The user is liable for all damages to third parties and their property. Operate the
device only in the technical condition prescribed and delivered by the manufacturer. Unauthorized
modifications to the device exclude the manufacturer's liability for any resulting damage.

General safety instructions for power tools

WARNING!
Read all safety notices and instructions. Failure to follow the safety instructions and instructions can
cause electric shock, fire, and/or severe injury.
Keep all safety notes and instructions for future reference.
The term power tool used in the safety instructions refers to mains operated power tools (with
power cord) and cordless power tools (without power cord).

Workplace Safety

Keep your work area clean and well lit. Clutter or unlit work areas can lead to accidents.
Do not work with the power tool in explosive environments containing flammable liquids, gases, or
dust. Power tools produce sparks that can ignite the dust or fumes.
Keep children and other persons away while using the power tool. If distracted, you may lose control
of the device.

Electrical Safety

The plug of the power tool must fit into the socket. The cap must not be changed in any way. Do not
use adapter plugs together with grounded power tools. Unchanged plugs and suitable sockets reduce
the risk of electric shock.
19