Télécharger Imprimer la page

Safety Of Persons - FUXTEC FX-E1HLP20 Mode D'emploi Original

Masquer les pouces Voir aussi pour FX-E1HLP20:

Publicité

Les langues disponibles

Les langues disponibles

Original-Bedienungsanleitung FUXTEC 20V Akku-Hochdruckreiniger FX-E1HDR20_de_en_fr_it_rev1
Avoid physical contact with grounded surfaces such as pipes, heaters, stoves, and refrigerators.
There is an increased risk of electric shock if your body is grounded.
- Halten Sie Elektrowerkzeuge von Regen oder Feuchtigkeit fern. The penetration of water into a
power tool increases the risk of electric shock.
- Verwenden Sie das Kabel nicht zum Tragen oder Aufhängen des Elektrowerkzeugs oder zum Ziehen
des Steckers aus der Steckdose. Keep the cable away from heat, oil, sharp edges or moving parts.
Damaged or tangled cables increase the risk of electric shock.
If you use a power tool outdoors, only use extension cables that are suitable for outdoor use. The use
of an extension cable suitable for outdoor use reduces the risk of electric shock.
If you use a power tool outdoors, only use extension cables that are suitable for outdoor use. The use
of an extension cable suitable for outdoor use reduces the risk of electric shock.

Safety of Persons

Be alert, pay attention to what you are doing, and use common sense when working with a power
tool. Do not use a power tool if you are tired or under the influence of drugs, alcohol, or medication.
A moment of inattention while utilizing the power tool can cause serious injury.
Wear personal protective equipment and always protective goggles. Wearing personal protective
equipment, such as a dust mask, non-slip safety shoes, safety helmet, or hearing protection,
depending on the type and use of the power tool reduces the risk of injury.
Avoid unintentional commissioning. Make sure that the power tool is switched off before connecting
it to the power supply and/or battery, picking it up or carrying it. If you have your finger on the
switch when carrying the power tool or if you connect the device to the power supply while it is
switched on, this can lead to accidents.
Remove adjustment tools or wrenches before turning on the power tool. A tool or key that is in a
rotating part of the device can cause injury.
Avoid abnormal posture. Make sure you have a secure
Stand and keep your balance at all times. This allows you to better control the power tool in
unexpected situations.
Wear suitable clothing. Do not wear loose clothing or jewellery. Keep hair, clothing, and gloves away
from moving parts. Loose clothing, jewellery, or long hair can be caught by moving parts.
20

Publicité

loading