Original-Bedienungsanleitung FUXTEC 20V Akku-Hochdruckreiniger FX-E1HDR20_de_en_fr_it_rev1
During Operation
Do not switch on the device if persons (especially children) or animals are in the immediate vicinity.
Make sure that children do not play with the device.
Make sure that you have a firm stand and work calmly and carefully. Use the appropriate saw blades
according to the working material (wood, metal, brick, plaster, etc.). An incorrect selection can lead
to slipping and injury. Wear hearing protection when using the device. Exposure to noise can lead to
hearing loss. Hold the power tool by the insulated grip surfaces.
When carrying out your work, you may come into contact with concealed cables, and this may result
in electric shock if you do not hold the saw properly.
After use
Switch off the device and remove the battery from the saw. Then place the unit in a safe place.
Do not store the device within reach of children. Make sure that the ventilation slots in the device
are clean.
Please do not clean the dirt with water. The electrical device may be damaged.
Safety instructions for the charger
Keep the charger away from rain or moisture. The penetration of water into a charger increases the
risk of electric shock.
Keep the charger clean. There is a risk of electric shock from soiling.
Check the charger, cable, and plug before each use. Do not use the charger if you notice any damage.
Do not open the charger yourself and have it repaired only by qualified personnel and only with
original spare parts.
Damaged chargers, cables, and connectors increase the risk of electric shock.
Do not place objects on the charger or place them on soft surfaces. There is a risk of fire.
Always check that the mains voltage corresponds to the voltage indicated on the charger's
nameplate.
- Verwenden Sie das Ladegerät niemals, wenn das Kabel, der Stecker oder das Gerät selbst durch
äußere Einflüsse beschädigt wird. Take the charger to the nearest specialist workshop.
Never open the charger under any circumstances. Take it to a specialist workshop in the event of a
fault.
23