HIKOKI UR 18DSML Mode D'emploi page 15

OPERATION
Action
Turning the power ON/OFF*
Turning the stand-by ON/OFF*
Displays Source screen*
3
Remote control selection of Digital TV,
FM/DAB or Bluetooth source*
Display Menu screen
Selecting Source, Menu and Other
Setup Items
Volume adjustment* (All source)
5
Switching channels*
4
( : Digital TV, FM, DAB)
S
Displays All Channel List (
Displays Audio language setting screen
( : Digital TV)
S
Displays Subtitle language setting
screen ( : Digital TV)
S
Playing/pausing external devices*
( : Bluetooth, SD card, USB)
S
Selecting songs on external devices
(changing tracks)*
6
( : Bluetooth, SD card, USB)
S
Changing the FM frequency (
Playing back video or music from an
external device* ( : AUX)
7 S
Recharging your smartphone*
* 1: The unit cannot be turned on by pressing the Standby
button on the remote control.
* 2: In standby mode, the power button LED lights red.
NOTE
○ The power is automatically turned off after about 24
hours in standby mode.
* 3: The currently selected item is highlighted in green.
* 4: Source Selection Screen is not displayed.
SETTINGS ITEMS
Settings items
Auto Search
*1
Manual Search
*1
Antenna select
Country
Figure
8-1
1
8-2
2
9
10
4
11
12
13
14
15
: Digital TV)
S
16-1
16-2
6
17
18*
5
: FM)
S
19
20
8
Main functions
Receivable TV/FM/DAB broadcast
frequencies are registered automatically
TV broadcast frequencies are registered
manually
Selects antenna (Built-in/External)
Sets the country in which the TV
broadcast receiver is installed.
* 5: When playing back content from Bluetooth devices or
external devices, lower the volume of the player before
beginning playback, and then gradually raise the volume
of the player.
Page
* 6:
6
Pair a Bluetooth-compatible device with the TV in advance.
Insert an SD card or plug a USB memory device into the
6
TV properly.
6
An external device connected to the AUX port of the TV
cannot be controlled using the TV. Please control the
6 external device itself.
* 7:
NOTE
7
○ Obtain a 4-pole mini-plug to connect a video camera,
DVD player or other video output compatible device.
7
○ Only audio can be output from a smart phone.
○ If there is no audio signal, "NO SIGNAL" is displayed on
7
the screen.
○ If the audio signal on an external device is low, it may not
7
be possible to increase it.
○ When connected to a smart phone, the ring tone may not
7
be heard when there is an incoming call.
* 8: A smartphone or a mobile phone can be connected
7
to the TV & radio and recharged using a commercially
available charging cable with a USB connector.
Other sources can be played back while a smartphone
7
or mobile phone is charging.
NOTE
8
○ In SD card mode, USB charging is not available.
During USB charging, switch to some other source.
○ While charging through USB, the sound may occasionally
cut out, or the power may shut off . If this happens, lower
8
the volume, or stop charging through USB.
○ Some USB devices may not be chargeable.
○ The TV & radio is designed to deactivate USB output
and disable the recharging of smartphones and mobile
8
phones when the power level of the battery is low.
Should the aforementioned occur, recharge the battery
8
or replace with a fully charged battery.
○ If the voltage is low when the AC adapter is in use, the
USB output may be cut off , discontinuing any recharging.
○ Use a fully charged battery when using a battery as this
device's power source.
You will not be able to recharge smartphones or mobile
phones when the battery power level becomes low.
○ The time required for charging varies in accordance with
the smartphone or mobile phone being recharged.
○ Do not use the recharge function for any devices other
than a smartphone or mobile phone.
○ The TV & radio may not be able to recharge some
smartphone or mobile phone models.
○ ○ ○
–
○
○ ○ ○
–
○
15
Source
SD card USB
– – – – –
– – – – – –
– – – – –
– – – – – –
English
– – – –
– – – –
– – – –
– – – –