HIKOKI UR 18DSML Mode D'emploi page 14

English
AA batteries
AAA batteries for the remote control
Protection sheet for display
Warning
Prohibited action
For information about the operation buttons, refer to
"NAMES OF PARTS AND BUTTON FUNCTIONS".
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains the
accessories listed on page 9.
Standard accessories are subject to change without notice.
PRIOR TO OPERATION
Action
Installing backup batteries
Installing batteries in the remote
control
Attaching the protection sheet for
display
AC adapter installation
*2
Storing the AC adapter and remote
control
Inserting and removing the battery
Preparing the antenna
*4
○ In order to connect a device that supports video output
such as a video camera or a DVD player, use a 4-pole
mini-plug cable that includes a video connection.
Audio Audio
* 1: Time settings and TV & radio station frequencies can be
saved by installing batteries in the unit.
* 2:
NOTE
○ When used together with the batteries, the AC adapter
is the main power source and no battery power is
consumed.
○ When used together with the AC adapter, the batteries
will not recharge as this device has no recharge function.
* 3:
CAUTION
Do not touch the terminals.
Doing so may result in cuts to the hand or other injuries.
Only a 14.4 V or 18 V slide-type battery can be used with this
device. (BSL36B18 cannot be used)
Figure
1
*1
2
3
4
5
6
*3
7
Video Ground
NOTE
○ Do not apply any excessive pressure when inserting the
battery. If the battery does not easily slide into place, it is
not being inserted properly.
Check to see if the battery is facing the correct direction
and that there is nothing obstructing the path of insertion.
○ If is displayed when the device is switched on
following battery installation, the battery charge is low.
In this situation, either use the AC adapter or install a fully
charged battery.
* 4: Use the built-in antenna or the connector for an external
connector.
Adjust direction, length and angle of the antenna while
checking reception condition.
WATCHING TV OR LISTENING TO
FM/DAB
1. Select the source you want to listen to (Digital TV, FM or
DAB)
2. Selecting an antenna
Use "Antenna Select" to select Built-in or External
antenna.
Adjust antenna orientation, length, angle and position.
3. Set a channel.
Use "Auto Search" to select.
For TV, it is also possible to use "Manual Search" to set
channels.
Page
4. Select the desired station.
4
NOTE
○ Reception in some locations and areas can be poor or
4
non-existent.
○ With the TV, you will not be able to set up channels if the
4
Country setting is incorrect.
○ The TV & radio can only receive non encrypted free TV
5 channels.
5
CONNECTING WITH BLUETOOTH
DEVICES
5
5
1. Pairing (Registering devices)
Pairing is required for Bluetooth communication.
Set your Bluetooth device to pairing mode.
(For instructions on pairing, see the manual for the
Bluetooth device to be used.)
2. Set the TV & radio for pairing mode
Switch the source to " Bluetooth ".
" Bluetooth Ready " is displayed on the screen, and the
machine enters pairing standby mode.
Select " UR18DSML " on your Bluetooth device's list of
connected devices to complete the pairing.
3. Input pass key
Some Bluetooth devices may require pass key input
when connecting.
If this should be the case, input " 0000 ".
Also, if connection authorization is requested, input
" authorized ".
Connection is successful once " Connected " is displayed.
NOTE
○ Once paired,
established the next time the devices are switched on. If
the Bluetooth connection is lost, re-pair the devices.
○ No more than two devices can be paired simultaneously.
○ Connection with all Bluetooth devices cannot be
guaranteed. Before attempting connection, always
check for compatibility.
○ The Bluetooth ® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc.
14
connection will be automatically