technical data
technical data
Supply: AC3
Voltage: 208, 230, 400, 460, 575 V (Factory preset: 400 VAC)
Frequenz: 50/60 Hz
Output voltage: 24 VAC
Compressed air feed: Max 5 bar./ 65lb/sq.in
Working temperature, electronic: -10°C to +50°C, 14°F to 122°F
Safety classification: IP54
technical data
prod. no:
max
air volume
air volume
S-1*
1400 m
/h
3
824 cfm
* for the installation, compressed air with oil separator and pressure reducer will be required. pressure max 5 bar./71 lb/sq.in **
Dependent of the selection of filter cartridge.
*** excl. fan
filter cartridges
type of
prod. no.
filter media
CART-OA
Antistatic
CART-O
Polyester
Special media
*) In some specific installaions where the filter cartridges O and OA
are not appropriate there are a number of other types of
cartridge/media available. Contact PlymoVent Technical
Department for advice.
plymovent's Smart"one" filter is a highly-efficient cartridge
collector for removal of many sort of dust, welding fume,
grinding dust and other dry contaminants.
Simple and reliable principle of filtration. contaminated
air(A) will pass over a baffle (B) protecting the cartridges,
and the particles are evenly applied. the air is cleaned up
to 99,9% . the contaminants are collected on the cartridge
surface (c). cleaning of the cartridge will take place by a
short pulse of compressed air from a valve (D) inside the
cartridge, with help from a specialy-designed Ram-Air™
cartridge holder (the cleaning can be made during ope-
ration or with the fan off). the particles will then fall down
and will be collected in the collection bin(e). the filtered air
(f) pass through the direct mounted fan or the direct con-
nected ductings.
071113/0 SmartOne
average
total
filter area
1000 - 1200 m
/h
max 19 m
3
2
588-705 cfm
max 205 sg.ft
efficiency
up to
99,9 %
99,9 %
*)
Weight
noise level
db(a)
**
103 kg***
227 lbs
f
D
e
< 70
a
b
c
EN - 3