Replacing The Complete Sealing Bar - Orved bright 315 Mode D'emploi Et D'entretien

There is an identification plate on the back of the machine bearing the following information:
Model
Voltage
Frequency
Power
Weight
ATTENTION!
• Do not replace the Teflon when the bar is still hot because you could burn yourself.
• Always unplug the appliance before carrying out any maintenance.

11.3 REPlACING ThE COMPlETE SEAlING BAR

• Extract the sealing bar by lifting it horizontally at both ends.
• Insert the new one making sure the bar engages correctly with the electrical contacts.
Rev. 05 - 04/2018 - Cod. 1500458 - Instruction manual for vacuum chamber packaging machines with digital control panel "Serie Bright"
MAINTENANCE AND TEChNICAl SUPPORT
year of
manufacture
Product code
Serial
number
63