Installation; Assembly Of Module; Wall Mounting - aqua ECO WASH Mode D'emploi

PUMP MODULE
Accessories for eco•wash system
2.0

INSTALLATION

2.1 A
SSEMBLY OF MODULE

Lift the lids of the modules composing the system (use a screwdriver to position the screws in opening
position), so all circuits are uncovered.

Insert the green connectors (so the writing TOP is legible) on left side of the circuits. Align two modules
and press to realise electric connection between them.

Insert the modules retainers in the internal part of the two boxes.
1
2
Example of an assembled system with four pumps:
2.2 W
ALL MOUNTING

Mount the module on the system and mark the two holes to be drilled.

Remove the module, drill the holes and insert the two dowels.

Reposition the module and secure it with two screws.
ADSP7000610 rev. 1.2 20/02/2014
INSTALLATION
ENGLISH
8/26