Velleman CAMCOLMS3 Mode D'emploi page 8

7.3 Image Rotation/Flip
Click the rotate button to rotate or flip the image.
7.4 System Settings Menu
The first time the xploview software is started, the default settings will be loaded. You may change these
settings manually in the system settings menu.
Device Setup
If the image captured was not displayed by default, you can change this by selecting it from the Device
drop-down menu.
The resolution of the image you capture can be changed from the Resolution drop-down menu.
Timed Shot Setup
Adjust the frequency and duration of automatic image capture.
V. 02 – 22/11/2016
CAMCOLMS3
8 ©Velleman nv