Velleman CAMCOLMS3 Mode D'emploi page 4

5. Getting Started
5.1 Software Installation
Windows ®
1. Insert the included CD-ROM in the CD-ROM drive of your computer.
2. Double-click the xploview v3.2.xx.exe icon located on the CD-ROM.
3. Follow the setup wizard and install the application software.
Mac ® OS
1. Insert the included CD-ROM in the CD-ROM drive of your computer.
2. Double-click the xploview v3.2.xx.dmg icon located on the CD-ROM.
3. Drag the xploview icon into the Applications folder.
5.2 Connecting the Microscope
Connect the microscope to a powered USB port.
5.3 Starting the Software
Windows ®
Double-click on the xploview icon on your desktop to start the software.
Mac ® OS
Double-click on the xploview icon in the Applications folder to start the software.
When the device is connected for the first time, a driver will automatically
Each time when the xploview software is started, the device should start
automatically. Otherwise, the device can be selected from the device setup
5.4 Installing a Slide
Place a prepared specimen slide on the specimen stage and slide it into the clips, such that the clips hold
the slide securely.
V. 02 – 22/11/2016
be installed. This process could take up to a few minutes.
section of the system settings menu.
CAMCOLMS3
NOTE
4 ©Velleman nv