D-Link DUB-H7 Guide D'installation page 5

FAST-CHARGE MODE
CHANGING FROM STANDARD MODE TO FAST-CHARGE MODE
• Standard Mode: When the DUB-H7 is connected to a computer that is powered on, the
DUB-H7 will enter Standard Mode. In this mode, a connected iPad may display a "Not
Charging" status, and will charge its battery very slowly. If the power adapter is not connected to
the DUB-H7, the hub will draw power from your PC's USB port, affecting the speed and ability
of your iPad to charge its battery.
• Fast-Charge Mode: When the DUB-H7 is not connected to a computer or is connected to a
computer that is powered off or in standby/sleep mode, all USB ports will supply additional
power to effectively and quickly charge an iPad. Please note that in order to use Fast-Charge
Mode, the DUB-H7 must also be connected to the power adapter, and the LED on the hub
must be lit green to indicate it is receiving power.
Notes:
1. We suggest the total combined power draw of 7 ports does not exceed 12 W or 2.4 A.
2. The actual charge capacity provided is dependent on attached device needs.
3. The iPad_Charge.exe program is only available for Windows OS.
®
iPAD SYNC
CHARGING AND SYNCING YOUR iPAD AT THE SAME TIME
For iPad models with a 30-pin port, if you want to charge and sync your iPad simultaneously when
it is connected via the DUB-H7 to a Windows computer, go to the Product Support page for the
DUB-H7 on www.dlink.com and download the iPad_Charge.exe program onto your computer.
Once you've installed this program, you'll be able to sync and charge your iPad simultaneously.
®
Note: iPad is a registered trademark of Apple Inc.
DUB-H7
3