D-Link DUB-H7 Guide D'installation page 4

PRODUCT
SETUP
QUICK INSTALLATION
2
Plug the power adapter into the receptor located on the
back of the DUB-H7. Plug the other end into a wall outlet.
The LED on the DUB-H7 will turn green to indicate that the
hub is receiving power.
Plug the square (Type B) end of the included USB cable
into the back of the DUB-H7.
Plug the Type A connector end of the included USB cable
into an available USB port on your computer.
Your computer will automatically detect and install the
drivers for the DUB-H7. You may now connect USB 2.0 or
USB 1.1 devices to any available USB port on the front of
the DUB-H7.
DUB-H7