HOW TO USE
BEFORE USING FOR THE FIRST TIME
1.
Remove all packaging material.
2.
Before using for the first time heat the
hob at the highest temperature for a few
minutes to burn off any residue from the
manufacturing. The product may smoke
and smell a little, but this is completely
normal and soon stops.
WARNING!
This is the only situation in which the hob
should be warmed up without a pan.
HOW TO USE
1.
Place a suitable pan on the hob.
2.
Turn the temperature control to the
required temperature.
3.
After use, set the temperature control in
position 0 and pull out the plug.
NOTE:
The power light goes off when the set
temperature is reached.
IMPORTANT:
•
Use pans with a thick, smooth bottom,
with a diameter of approx. 15 to 17 cm
and a volume of max. 1 litre.
•
Do not use pans with a diameter smaller
than the hob.
•
Make sure that the pan does not stick
outside the hob or stick out over the
controls.
•
Do not use pans that do not have a
smooth, flat bottom.
MAINTENANCE
CLEANING
1.
Pull out the plug and wait until the
product has cooled before cleaning.
2.
Wipe the enamel surface of the product
with a soft, damp cloth.
3.
Remove any encrusted scraps with a cloth
moistened with a mild detergent.
4.
Wipe with a soft cloth.
NOTE:
Use oven detergent to preserve the
appearance of the hob.
WARNING!
•
Do not allow the power cord to come
into contact with hot surfaces.
•
Do not immerse the product in water or
any other liquid.
STORAGE
•
Pull out the plug and allow the product to
cool.
•
Store the product in a cool, dry place, out
of the reach of children.
EN
15