Epson TM-T88V-DT Manuel De L'utilisateur page 10

English
Do not use the product in locations subject to high humidity or dust levels.
Excessive humidity and dust may cause paper jams and other problems,
such as fire, or electric shock.
Do not use the product where inflammable fumes of gasoline, benzine,
thinner, or other inflammable liquids may be in the air. Doing so may cause
an explosion or fire.
Be careful when transporting, opening, and incinerating the package. You
may cut your finger on the edge of the cardboard.
Be sure to set this product on a firm, stable, horizontal surface. The product
may break or cause injury if it falls.
Never clean the product with alcohol, benzine, thinner, or other such
solvent. Doing so may damage or break parts made of plastic or rubber.
To ensure safety, unplug this product before leaving it for an extended period.
Do not stand on or place heavy objects on top of this product. Equipment
may fall or collapse, causing breakage and possible injury.
Do not use aerosol sprayers containing flammable gas inside or around this
product. Doing so may cause fire.
The print head can be very hot during and immediately after printing. If
you need to touch it, wait until it cools down. Touching it before that may
cause burns.
Be careful of the autocutter blade of the printer.
Connecting an outdoor overhead LAN cable directly to your product may
lead to lightning damage. If you need to connect such a cable to your
product, the cable must be protected against an electrical surge between
the cable and your product. You should avoid connecting your product to
a non-surge protected outdoor overhead LAN cable.
❏
Optional customer display
Do not use excessive force to rotate the customer display or to change the
angle of it. Doing so may break the customer display or the support.
Caution Labels
The caution labels on the product indicate the following precautions.
CAUTION:
Do not touch the thermal head and the frame on its side because it can be
very hot after printing.
CAUTION:
Touching the manual cutter may cause injury.
Restriction of Use
When this product is used for applications requiring high reliability/safety, such
as transportation devices related to aviation, rail, marine, automotive, etc.;
disaster prevention devices; various safety devices, etc.; or functional/precision
devices, etc.; you should use this product only after giving consideration to
including fail-safes and redundancies into your design to maintain safety and
total system reliability. Because this product was not intended for use in
applications requiring extremely high reliability/safety, such as aerospace
equipment, main communication equipment, nuclear power control equipment,
or medical equipment related to direct medical care, etc., please make your own
judgment on this product's suitability after a full evaluation.
4 TM-T88V-DT User's Manual