Haier HI50IB20SS Guide De L'utilisateur page 19

ICE MACHINE USE
CONTROLS (Cont.)
To decrease the cube size, press the CLEAN button. The ICE green LED
lamp will blink momentarily each time the CLEAN button is pressed. The
green LED will remain illuminated when the smallest size cube is achieved.
To increase the cube size, press the MODE button. The BIN FULL red LED
lamp will blink momentarily each time the MODE button is pressed. The red
LED will remain illuminated when the largest size cube is achieved.
NOTES:
• When adjusting the ice cube size, if the ICE, HARVEST and BIN FULL LEDs
all start blinking at the same time, this indicates that the ice cube size is
set to medium. Medium is the original factory setting.
• Ice Size Adjustment mode cannot be entered if the ice machine is in the
Clean or Bin Full mode.
• After 10 seconds without any operation, the ice machine will return to the
previous mode.
49-60811
19