Ice Machine Use; Operation - Haier HI50IB20SS Guide De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ICE MACHINE USE

OPERATION

1. The operating procedure is completely automatic.
2. When the ice storage bin is full of ice cubes, the machine stops making ice
automatically. It starts making ice again after ice cubes are removed.
3. The different colors of the LED display indicate various work modes.
4. A sensitive probe and accurate timer enhance the performance of the ice
machine.
5. A compressor protection system is built in.
HOW THE ICE MACHINE USES THE WATER
The ice machine begins with a fixed charge of water that is contained in the
water trough. As the water flows to the freezing evaporator surface, the
portion of water that does not contain mineral impurities freezes and sticks
to the ice cube molds. The water containing impurities falls back into the
water trough. During the ice making process, fresh water enters into the
water trough continuously as the water in the trough freezes continuously
in the evaporator.
B
A
F
16
C
H
G
A. Water Inlet
B. Water Distribution
Tube
C. Evaporator
D
D. Water Pump
E. Compressor
F. Condenser
G. Fan Motor
H. Hot Gas Valve
E
49-60811

Publicité

Table des Matières
loading

Table des Matières