Conformity; General Specifications - Zodiac O'Clair Pool First Notice De Montage Et D'utilisation

2-Notice Poolfirst ANG_Mise en page 1 05/01/11 11:06 Page20
This device has been designed and manufactured according to the following norms:
According to the directive on Electromagnetic compatibility: 2004/108/EC and norms
EN 55014-1: 2000 +A1:2001 +A2:2002
EN 55014-2: 1997 +A1:2002
EN 61000-3-2: 2000 + A2:2005
EN 61000-3-3: 1995 + A1:2001 +A2:2005
According to the directive on low voltage: 2006/95/EC and the norms:
EN 60335-1 : 2002 + A1:2004 + A2:2006 +A11:2004 + A12:2006
EN 60335-2-41 : 2003 + A1:2004
The device conforms to all of the above.
It has been tested under normal conditions of use.
R&TTE CONFORMITY
BZT - ETS Certification Gmbh, attests under its responsibility that the product ERONE 024A
manufactured by ELPRO INNOTEK S.p.A, Via Piave, 23 - I.31020. to which the present certificate
refers is conform to the appropriate normalisation norms and documents:
> EN 300 220-3 V1.1.1 (2000-09): Electromagnetic and radiofrequency spectrum compatibility
(ERM); low range apparatus (SRD); radio equipment used in the frequency range between
25 MHz and 1 000 MHz for power levels of up to 500 mW. Part 3: harmonised EN norm
covering the essential requirements of article 3.2 of R&TTE Directive.
> EN 301 489-03 (2000-07): Electromagnetic and radiofrequency spectrum compatibility (ERM);
electromagnetic compatibility norm (EMC) for radio equipment and services. Part 3: Conditions
specific to low range apparatus (SRD) operating at frequencies between 9 kHz and 40 GHz.
> EN 60 065 (1998): Audio and video devices and similar electronic appliances. - Safety
requirements.
This apparatus is not designed for use by persons (including children) whose physical, sensory
or mental abilities are reduced, nor by persons lacking in experience or knowledge, except if they
have benefited from supervision or prior instructions concerning the use of the apparatus given
by a person responsible for their safety.
Control box supply voltage: 230V 50 Hz
Robot supply voltage: 30 V DC
Installed load: 150 W max
Cable length: 18 m or 25 m
Robot size (WxDxH): 42 x 40 x 28 cm
Pack size (WxDxH): 58 x 58 x 59 cm
The manufacturer reserves the right to modify these specifications without notice.

7 / CONFORMITY

8 / GENERAL SPECIFICATIONS

Weight of robot: 9.9 kg
Packed weight: 22.1 kg
Filtration capacity: 20 microns
Theoretical width cleaned: 330 mm
3
Pump output: 16m
Cycle lengths: 1.30 hrs, 3 hrs
20
/ h