Installation And Setting - Meister MAH1500-1 Traduction Du Manuel D'utilisation Original

5452970-Abbruchham_man 08.01.15 07:27 Seite 38
• Use the additional handle supplied
with the unit. Loss of control of the
unit may lead to injuries
• Hold the tool by the insulated
handle surfaces when carrying out
tasks during which it is possible
that the tools will come across
hidden power cables or its own
cable. Contact with a power-carrying
cable can also put metal parts of the
unit under power and cause an
electric shock.
• Use the machine for its intended
purposes only.
• When the machine is in operation,
grasp it with both hands and take a
firm stance.
• Power sockets for use out of doors
must be fitted with residual-current
safety switches.
• Never remove chippings or debris
when the machine is running.
• Before drilling in a wall, ensure that
there are no electricity wires, water or
gas pipes under the surface.
• Secure small workpieces to ensure
that they are not entrained by the drill.
• Remove the power plug before
working on the machine, during all
intervals in work, and when the
machine is not in use.
• Always keep the power cable well
away from the drilling zone.
• Turn switch to OFF before plugging
into power supply.
• Always use the machine with the
38
additional grip.
• Do not allow persons under 16 years
of age to use the machine.
• Observe general safety instructions
for handling power tools!
Safety symbols
The symbols on the housing have the
following meanings:
Do not dispose of with the
household waste!
Important! Observe the
operating instructions!
Wear goggles.
Wear a dust protection
mask.
Wear ear defenders.
The housing is double
insulated
Voluntary "geprüfte Sicherheit"
seal of quality (tested safety)
CE mark (conformity with
European safety standards)
7 – Installation and setting
Attaching the tools (Fig. 4 + 5)
CAUTION! Pull out mains plug.
The jackhammer is equipped with a tool
chuck (5) suitable for SDS-max-type
tools. This type of tool chuck allows a
quick tool change without need for a
spanner.