Components; Correct Use - Meister MAH1500-1 Traduction Du Manuel D'utilisation Original

5452970-Abbruchham_man 08.01.15 07:27 Seite 34
• All parts of the operating cycle must
be taken into account for this
purpose (for example, also including
times in which the power tool is
switched off and times in which it is
switched on, but is running without
load). In order to prevent the risks
caused by vibrations,
• Wear gloves when using;
• Limit working times and shorten the
actual operating time. Safety measures
must be taken in order to protect the
operator. As a result, the evaluation of
the influence must be made whilst
taking account of the actual conditions
of use. (All parts of the operating cycle
must be taken into account for this
purpose. This also includes times in
which the power tool is switched off
and times in which it is switched on,
but is running without load.)
CAUTION! A certain amount of
noise is unavoidable when using
this device. Ensure you carry out noise-
intensive work during permitted times.
Maintain the quiet periods and limit
your work to the absolute minimum.
CAUTION! The effects of noise may
cause damage to your hearing.
Only ever work with suitable ear
defenders. Anybody else in the vicinity
should thus also wear ear defenders.
3 – Components
1 Gear cover
2 On/Off switch
3 Impact rate regulation
4 Additional handle
5 Tool holder
6 Single-poined chisel
7 Flat chisel
34
8 Flange wrench
4 – Correct use
Demolishing of masonry (fig. 7+8).
Use suitable accessories only (see
manufacturer's directions). All other
applications are expressly excluded.
The tool is intended only for no
industrial use.
This unit may not be used by people
(including children) with reduced
physical, sensory or mental capacities,
with a lack of experience and without
the appropriate knowledge, unless they
are supervised by someone who is
responsible for their safety or have been
instructed by such a person with regard
to how the unit is to be operated.
Children should be supervised to ensure
that they do not play with the device.
WARNING! The warranty is voided
by any improper use or use not in
accordance with manufacturer's
instructions. Any necessary repair must
be performed by qualified personal.
Improper use of the product
This power tool may not be used as a
screwdriver.
All applications carried out with the device
that are not listed in the "Proper use"
chapter will be considered improper use.
Uses for which the tool is not designed
may cause risks and injury. Do not use
accessories that are not intended
specifically for this electrical tool.
Just because you can affix an
accessory to your electrical tool, there is
no guarantee it is safe to use.