Lenze E82ZAFFC001 Instructions De Montage page 27

)
Note!
If you use a flat cable for the bus connection to 8200 motec, we recommend
the following adapter (see picture below):
Order designation E82ZMFF
1. Screw component 0 into the fitting thread of the motec carrier housing.
2. Insert AS−i flat cable into component 1 and plug component 1 onto component 0
3. Tighten the adapter screws
4. Assign the terminals.
EDK82ZAFFC−001 DE/EN/FR 7.0
1
l
Electrical installation
0
4
E82ZAFF004
27