Asko HiddenHelper Série Mode D'emploi page 24

Hidden Helpers
Instruction
4. If necessary, you can adjust the
ironing board.
Carefully bend out the two plastic
latches (one on each side) using
a screwdriver. Pull out the ironing
board.
5. Adjust the extension length by
undoing the screws on the two stops
A(one on each side). Check that the
plastic pins are locked B.
Replace the ironing board.
A sleeve board is available as an
accessory for the ironing board.
Installing the sleeve board (accesssorie)
Instruction
1. Assemble the enclosed holder on
right or left side of the Ironing Board
with the two screws.
. Fold out the bars on the Sleeve
Board and put these in the holder.
. To loosen the Sleeve Board:
• Push up and pull out.
• Keep the board under the Ironing
Board when it's not in use.
4
Picture
A
Picture
B