Publicité
Les langues disponibles
Les langues disponibles
Hidden Helpers
Instruction
4. A Stacked installation. Attach the
enclosed anti-tilt protection to the
washing machine and the dryer.
Push the upper part of the anti-tilt
protection into the dryer until it
hooks into place. Screw the lower
part into place with the screws you
removed from the washing machine
(A).
If the machines are set right against
the wall, the dryer cable must be
routed through the cutout on the
middle section (B).
4. B Installation on washing machine
or tumble dryer. Attach the enclosed
anti-tilt protection as illustrated.
Screw them into place with the
screws you removed from the
washing machine .
Adjusting the ironing board
Instruction
1. Press the door to open it.
. Take hold of the handle and pull it
out until it is fully extended. Fold up
the ironing board.
. To ensure that it is stable, it is
important that the back edge of
ironing board is pushed firmly against
the tumble dryer when it is in the
locked position.
Picture
B
Picture
A
Publicité
