Olimpia splendid ASTOMI 80 Instructions Pour L'installation, L'emploi Et L'entretien page 28

• Use only water to clean. Do not use detergents or
chemical substances.
• Do not rub or scrub the ultrasound disc (1a)
d.
Wash and dry the cover (3).
e. Clean the outer part of the body of the appliance (1) with a soft cloth, slightly damp
if necessary.
• Do not immerse the appliance body (1), the transformer
(7) and the USB cable (8) into water or other liquids.
• Do not leave the appliance with water in the reservoir,
especially if you do not intend to use it now.
- - - - - - - - - - - - - - - - - -
ASTOMI 80 model
The lid (10) protects the transducer (1a) (Fig. M).
It can be removed to facilitate cleaning of the transducer, by rotating it anti-clockwise. If
the transducer and the lid are dirty, the mist distributed may not be continuous or in low
quantities. Clean the lid with water and dry it.
Operate as described in the "Cleaning after use" paragraph to clean the transducer.
Before using the appliance, position the lid correctly and rotate it in a clockwise direction
(Fig. M).
- - - - - - - - - - - - - - - - - -
- It is advised to use distilled water, especially if water in your geographical area is
particularly hard. This helps reduce the precipitation of minerals and white powder.
6b - DECALCIFICATION
EN- 12