ENVIRONMENT
Protection of the environment – DIRECTIVE 2002/96/CE
In order to protect our environment and our health, the elimination
of electrical equipment at the end of its working life must be done
according to very specific rules and requires the involvement of
all parties, suppliers and users.
That is why your unit, as indicated by the symbol on its information
plate, must never be thrown into a public or private garbage can
intended for household wastes.
At the time of its elimination, it is your responsibility to bring your unit
to a public collection center designated for the recycling of electrical
and electronic equipment. To obtain information about
the centers for collection and recycling of discarded
units, please contact the local authorities of your region,
the household waste collection services or the store
where you purchased your unit.
START-UP AND USE
1
USE
ST
When you unwrap your unit, carefully remove all of the securing
■ ■
elements and bags and labels from the packaging.
Make sure that all of the parts and accessories are present
■ ■
and intact.
Before using your unit, clean your bowl thoroughly with soapy
■ ■
water or water with dishwashing liquid.
Rinse and carefully dry all of the parts.
■ ■
See upkeep section
ASSEMBLY
Put the seal on the blade unit.
■ ■
Install the blade unit and the seal on the plastic base.
■ ■
Screw the base with the blade unit and the seal onto the bottom
■ ■
of the glass bowl of the blender (or onto the bottom of the glass
bowl of the mini-grinder).
Position the glass bowl on the base and then turn it to the left
■ ■
to lock it into place.
Plug in the power cord.
■ ■
75