Télécharger Imprimer la page

Ribimex RIBITECH PRCCELCD Manuel D'instructions Et D'utilisation page 13

Publicité

Les langues disponibles

Les langues disponibles

III. SAFETY INSTRUCTIONS
Symbols
Do not expose to weather conditions (ex.: storm, rain, snow ...) or moisture.
Do not use in damp or wet areas.
Caution! Risk of injury and/or damage and/or deterioration of product in case of non compliance
to safety requirements
Read the instructions manual.
Class II product with double insulation
Wear protective equipment: ear and goggles protection
Wear protective gloves and boots.
Keep all your body parts away from moving parts (e.g. chuck, bits...)
Keep persons (esp. children) and animals away from product and working area
Disconnect product from its power source before maintenance, cleaning or any intervention on
product; or when you do not use product.
Disconnect product from its main power source, if product, power cable, or extension cord is
damaged or cut during operation.
Unplug product by pulling the plug. Do not pull the cable.
Do not dispose of this product with household rubbish.
Dispose of this product in the nearest recycle centre.
Please contact your local authority or local recycle centre for further information for its safe
disposal.
(A) General power tool safety warnings
WARNING Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
Page 13 / 28

Publicité

loading

Ce manuel est également adapté pour:

Ribitech 280016