Yamaha YAS-106 Mode D'emploi page 17

HINT
Audio Return Channel (ARC) supported TV
• Connect an HDMI cable to the audio return channel supported jack (the jack with
"ARC" indicated) on TV.
• Once the HDMI control function has been activated, video and audio content from
playback devices can be output from the TV even when this unit is off (HDMI signal
pass-through).
• Enable the HDMI control function of this unit to activate the Audio Return Channel
(ARC) (p. 26).
What is Audio Return Channel (ARC)?
In order for the unit to play audio from a TV, the TV must usually be
connected to the unit via an audio cable as well as an HDMI cable.
If, however, the TV supports Audio Return Channel (ARC), TV
audio signals can be input to the unit via the HDMI cable that
outputs video signals from the unit to the TV.
b
Connecting a game consol via the
analog jack
Connect an external device, such as a game console or TV that does
not have an optical digital audio output, to the ANALOG input jack of
the unit.
SUBWOOFER OUT ANALOG
ANALOG
3.5 mm stereo mini plug cable
(optional)
Game console
NOTE
• When the ANALOG key on the remote control is pressed, the input source switches
to ANALOG, and sound from the device is output via this unit.
• If volume can be adjusted on the device connected to the unit's ANALOG input
jack, set that device's volume to the same level as that of other devices connected
to the unit's HDMI jacks to prevent volume from being louder than expected.
TV OUT (ARC) IN
HDMI AC IN
17
En