Gastros InductWarm 130+ Mode D'emploi page 25

Overview of accessories
2
7
4
Use only original accessories from Gastros Switzerland!
CAUTION – Risk of fire and electric shock. Only replace power cord (No. 3) with original cable by the
manufacturer: Article No.: 6 01 10x xx
Cabling (example)
The power supply (POWER side) is independent of the BUS coupling (BUS side). Each unit must be connected to
electrical power, either directly via a power cord (3) as seen with devices A and D or indirectly via a power chain
cable (8) as seen with devices B and C.
In the example above, induction units A and B are connected with the BUS cable (7) and are controlled by one
control unit (4). These two elements have the same power level. Devices C and D are controlled individually by
own external control device. The infrared remote control (5) can be used to control all individual elements.
8
1
6
3
9
5
25