Basic Functions - Proline CD1200MP3 Manuel D'utilisation

BASIC FUNCTIONS

Switching power on/off: Save energy
To avoid unnecessary energy consumption always
the source selector to OFF position when you have
GENERAL OPERATION
1 . To select your sound source adjust the source
selector to CD/OFF/AM/FM.
2 . Adjust the sound with the VOLUME control.
3. To switch off the set, adjust the source selector to
OFF position.
RADIO
Radio reception
1. Slide the FUNCTION selector to
a desired
setting - FM or AM.
2. Rotate the TUNING control to find the desired
stations. The AM or FM frequency
NOTE: If you have tuned to an FM
stereo station, the FM stereo LED indicator
will light up.
3. When you have finished listening, slide the
FUNCTION selector to the OFF position to
Downloaded from www.vandenborre.be
– For FM, pull out the wire antenna
turn the antenna. Reduce its length if the signal is
set too strong (very close to a transmitter).
For AM the set is provided with a built-in antenna
–
so the
antenna by turning the whole set.
the
AM frequency show on display.
FM frequency show on display.
GB-5
RADIO
f y
ull
the