Power Supply - Proline CD1200MP3 Manuel D'utilisation

FUNCTION
1. FUNCTION SELECTOR
- Select source of sound CD, OFF, AM or FM,
2. REMOTE CONTROL SENSORE
- Receive the signal from the remote control.
3. CD DOOR
- Press to open/ close the CD door.
4. DISPLAY
- Show the CD functions and AM/FM radio frequency.
5. TUNING CONTROL
- Tune to desired AM//FM radio station.
6. PROG
CD/MP3: - program and review the programmed
tracks number.
7. F F OLDER
- In Mp3 mode, press to be folder up function.
8. MODE
- Select to different play mode.
9. STEREO HEADPHONE JACK
- 3.5mm stereo headphone jack.
10. SKIP ,
CD/MP3: - skips track backwards or forward.
STOP
11.
-Delete program play back
- stops CD playback; erases a CD program.
12.
- Start or pause CD/ play.
13. VOLUME
- Adjusts volume level.
14. AC INPUT
- Connect the AC power cord to the wall outl et.
15. ANT.
- To improve FM reception.
16. SPEAKER TERMINAL
- to connect the speaker wire.
Downloaded from www.vandenborre.be

POWER SUPPLY

AC Power
1 . Check if the power voltage, as shown on the
type plate located on the back of the set,
corresponds to your local AC power supply. If it
does not, consult your dealer or service centre
2 . Connect the power cord to the wall outlet. The
power supply is now connected and ready for use.
3 . To switch off completely, unplug the power cord
from the wall outlet.
•Unplug the power cord from the wall outlet to
protect your set during heavy thunderstorms.
•If electric cable is damaged, it must be replaced
by the manufacturer, or by the qualification
persons, in order to avoid a danger.
GB-4