Table des Matières
Publicité
Safety information
Mains supply
This equipment is designed to operate from a 230 Volt AC mains supply. Other power
sources may damage it.
Mains plug
We have fitted this equipment with a standard mains plug.
• If the mains lead becomes damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified person with a lead of the same type and rating to avoid a hazard.
• If you cut off the mains plug, for example to fit a different type, please destroy the old
plug as it would be dangerous if inserted into a live power outlet.
• If a fuse is fitted to the plug, remove the fuse before throwing the plug away.
• Carefully follow the wiring instructions supplied with a new mains plug.
• Never use a fused mains plug without the fuse cover.
Mains plug wiring for the UK
In a re-wirable plug the wires in the mains lead of this equipment must be connected as follows.
• The wire-coloured brown must be connected to the terminal that is marked with the letter L.
• The wire-coloured blue must be connected to the terminal that is marked with the letter N.
• Do not connect anything to the earth terminal which is marked E, or
• You must make sure the mains lead is firmly secured under the cord clamp.
Mains fuse
UK standard (BS1363) plugs must have a 3 amp (BS1362 type) fuse fitted. Replace the
plug or have the power lead assembly replaced if the fuse cover is lost.
Symbols
This equipment is double insulated and an
earth connection is not required.
This mark is applied to show the equipment
conforms to European safety and electro-
magnetic compatibility standards.
Safe use and care of your audio equipment
We have designed and made this product to meet European safety standards, but as with
any electrical equipment you must take care to get the longest working life from it and stay
safe. Here are a few tips to help you do this.
Read these instructions carefully before you try to use the equipment.
Protect the mains lead. You must ensure the mains lead cannot be walked on, crushed,
chafed or cut.
If the mains cord becomes damaged, it should be replaced by the manufacturer, its service
agent or similarly qualified person to avoid a hazard.
Avoid harsh conditions such as wet or damp places, high humidity, strong vibration,
extremely high or low temperatures, strong sunlight and places that are very dusty.
Never push objects into holes and ventilation slots.
To save power, switch off mains power or pull out the mains power plug when you are not
using the equipment, unless the function of the equipment requires a continuous power
supply.
Don't continue to use this equipment if you have spilt liquids in it, if it is damaged in any
way or if it does not work normally. Immediately unplug the equipment and seek expert
advice.
Downloaded from www.vandenborre.be
Dangerous voltage constituting a
risk of electric shock is present
inside this equipment.
There are important operating and
maintenance instructions in the liter-
ature accompanying this equipment.
GB-1
Publicité
Table des Matières
