Publicité
Les langues disponibles
Les langues disponibles
Your appliance complies with
the European directives and
their amendments.
ENERGY-SAVING MEASURES
In order to reduce the power
consumption of your appliance:
•
Install it in a suitable
location (see "Installing your
appliance").
•
Leave the doors open for
the shortest time possible.
•
Never put hot food in the
fridge or the freezer, and in
particular
soups
preparations that release a lot of
steam.
•
Check that your appliance
is working correctly and do not
allow
too
accumulate
(defrost when the ice is more
than 5-6 mm thick). Clean the
condenser on a regular basis
(see
chapter
maintenance
appliance").
•
Regularly check the door
seals and make sure that the
doors can be closed properly. If
this is not the case, contact
after-sales service.
• Do not adjust the temperature
too low.
Failure to install the draws,bins
•
and shelves properly can result
in increased power consumption.
and
other
much
ice
in
the
freezer
"Routine
of
your
Warning
If your transported the appliance
horizontally, position it vertically
and wait for 2 hours before
connecting it. A little oil may flow
into
enough time for the oil to return
to the motor before connecting
the appliance, failing which, it
could be
Always unplug your appliance
before any maintenance work.
Never pull on the power cord, but
only on the plug itself.
CLEANING
MAINTENANCE
appliance
maintenance operations.
to
with
systems, volatile oils, organic
solvents or abrasive components.
Do not use sharp or cutting
objects
to remove the ice. Use a plastic
sponge.
"Maintenance" chapter in this
manual to replace the light bulb.
using,
There are flammable materials at
the back of the appliance. Pay
attention to the symbol "Risk of
fire – flammable material" which
is
located
appliance.
37
thecooling
circuit.
Always
switch
before
Never clean the appliance
metal
objects,
Refer
to
WARNING!
keep the product far
away fire source during
service
and
on
rear
Allow
AND
off
the
any
steam
the
Please
disposal.
of
the
Publicité
