Blocking The Remote Control; Air Filter Cleaning Function; Swing Function (Swing); Follow Me Function - Olimpia splendid B0685 Instructions Pour L'installation, L'emploi Et L'entretien

4.9 - BLOCKING THE REMOTE CONTROL

• Block the wired remote control
• Press the
is displayed.
• In this condition, the appliance can only be controlled by the remote control supplied with the same.
• To unblock the remote control, press the

4.10 - AIR FILTER CLEANING FUNCTION

• The wired remote control records the total operating time of the appliance.
When the time of use reaches the pre-set value, the
be cleaned (see appliance use and maintenance manual).
• Perform cleaning; hold the
time count from zero.
THE PRE-DEFINED SETTING VALUE OF AIR FILTER CLEANING IS 2500 HOURS
AND CAN BE SET AT 1250 HOURS, 5000 HOURS OR 10000 HOURS. THE SETTING
METHOD IS GIVEN IN THIS PART OF THE INSTALLATION MANUAL (RESERVED
FOR QUALIFIED TECHNICAL STAFF).

4.11 - SWING FUNCTION (SWING)

• If the appliance has the switch function, it can be used to adjust the direction of the air.
• Hold the
• Hold the

4.12 - FOLLOW ME FUNCTION

• When the appliance is operating and the AUTO or COOL (Cooling) or HEAT (Heating) mode has been
selected, press the
NOTE:
Switch-over of the operating mode automatically deactivates this function.
• When the Follow Me function is active, the
of the room and transmits the value to the appliance every 3 minutes.

5 - CERTIFICATION AND TECHNICAL REQUIREMENTS

• EMC must be compliant with CCC certification.
EN - 16
and keys together; the remote control is blocked (no key active) and the
key for 3 seconds to reset the message and resume the operating
key for approx. 3 seconds to activate the function; the
key for approx. 3 seconds to deactivate the function; the
key to activate the Follow Me function.
and keys; the
icon switches on to indicate that the filter must
icon switches on; the remote control displays the temperature
icon switches off.
icon switches on.
icon switches off.
icon