Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4.5 - SETTING THE TEMPERATURE
In the operating modes (with exception of the FAN mode), the temperature can be adjusted from 17°C
•
to 30°C (62°F to 88°F) using the
NOTE:
The temperature cannot be adjusted in FAN mode.
4.6 - SETTING THE ON/OFF TIMER
•
Press the
key to set the timer on/off function. The
•
Press the
and
When the timer setting is lower than 10 hours, every time the
time will increase or decrease by 30 minutes.
When the timer setting is higher than 10 hours, every time the
time will increase or decrease by 1 hour.
•
After having set the timer, press the
function.
•
Press the
key to set the timer in switch-off mode.
•
Operate as described to set the timer in switch-on mode.
•
To deactivate the timer function, press the
switch off values at 0:0h.
NOTE:
If the wired remote control has been set at timer ON/OFF, press ON/OFF to switch the unit on/off.
4.7 - SETTING THE CLOCK
•
Hold the
key down for 3 seconds to enter the current time setting functions.
• The time on the clock flashes; adjust the time using the
•
Press the
or
Adjust the minutes using the
•
Press the
key or wait 5 seconds to confirm the setting and exit the function.
4.8 - SILENT OPERATING MODE
•
In COOL (Cooling), HEAT (Heating) and FAN (Ventilation) mode, press the
function. With this function active, the motor fan speed lowers, consequently decreasing the noise of the
appliance.
NOTE:
This mode cannot be selected in AUTO and DRY (dehumidification) mode.
and
keys to adjust the timer in switch-on mode.
key or wait 5 seconds to confirm the setting and exit the
keys to confirm the time and set the minutes.
and
keys.
and
icon are shown on the display.
and
and
key to enter the function, and then set the switch on and
and
keys.
keys are pressed, the
keys are pressed, the
keys.
key to set the "silent"
EN - 15
Publicité
Chapitres
Table des Matières
