Switching The Appliance On/Off; Setting The Operating Mode; Setting Fan Speed - Olimpia splendid B0685 Instructions Pour L'installation, L'emploi Et L'entretien

NOTE:
The wired remote control does not receive the vertical swing control instructions.
To activate/deactivate this function, it is necessary to operate on the relevant
remote control.

4.2 - SWITCHING THE APPLIANCE ON/OFF

Press the ON/OFF key to switch the appliance on or off.
•
• When the appliance is off, press the ON/OFF key and the appliance starts; the
switches on.
• By pressing the ON/OFF key, the appliance stops and the

4.3 - SETTING THE OPERATING MODE

• Press the
The operating mode is selected in the following order
AUTO >
(COOL) Cooling >
(DRY) Dehumidification >
(HEAT) Heating >
(FAN) Ventilation >
AUTO .....
The icon corresponding to the function selected switches on (in the upper part of the display).
NOTE:
When the controller has been set at COOL ONLY, there is no HEAT.

4.4 - SETTING FAN SPEED

• In Cooling (COOL), Heating (HEAT) and Ventilation (FAN) mode, press the
to adjust the fan speed according to the following sequence:
AUTO > LOW (Minimum) > MID (Medium) > HIGH (Maximum) ≤ AUTO ....
• The indicates the speed level selected.
NOTE:
In AUTO and DRY modes, the fan speed is pre-determined and cannot be adjusted.
EN - 14
key one or more times to set the operating mode.
key of the wired
icon on the display
icon on the display switches off.
key one or more times