Terraillon TPRO2100 Notice D'utilisation page 8

CLASS III ELECTRONIC MEDICAL BABYSCALE
Operation
1. Press [On] key to turn the product on. The following displays will appear in the following order:
2. When and icons appear on the display, place the baby on the product. The weight will appear
automatically. The weight is stable when
3. If the product operates with battery and is not used for 20 seconds, it will turn off automatically.
If the product operates on main, press [Off] key to turn it off.
Weighing with Tare
1. In weighing mode, press [Tare] key. « NET » will keep on flashing unless stable tare value
has been obtained.
2. When
Measuring Tape usage
When the babyscale is turned on and when the
measuring tape is plugged off the product, the
babyscale will then turn off automatically even if the
adaptor is plugged in.
If the measuring tape is inserted again in the product,
the babyscale will turn on automatically when
the adaptor is being used. If the product is operating
with batteries, [On] key will need to be pressed down
to turn on the product.
Warning indicators
Initial zero error. Step off the scale, wait until
Err0
the scale shows 0.0000 and repeat
measurement
Unstable zero. Please wait until the scale
Ustb
shows 0.000 and repeat measurement.
Overload: remove weight immediately.
Err2
Hardware problem.
Err3
Please contact place of purchase.
7
➜
appears and when the « NET » indication is not flashing anymore,
the product is ready for the next measurement.
➜
icon appears once again on the LCD display.
Measuring Tape
Low battery indication: replace it.
bAt
Hardware problem.
AdErr
Please contact place of purchase.
Hardware problem.
EEP
Please contact place of purchase.