Electrical Connection; Environment Concerns - IKEA FRAMTID OV9 Mode D'emploi

Masquer les pouces Voir aussi pour FRAMTID OV9:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH
• The appliance can be placed with its
back and one side close to the higher ap-
pliances or walls. The other side must be
placed close to the furniture with the
same height.
• The built-in unit must meet the stability
requirements of DIN 68930.

Electrical connection

Warning! Only a qualified electrician
and competent person must do the
electrical installation.
• The manufacturer is not responsible if you
do not follow these safety precautions.
• Ground the appliance according to safe-
ty precautions.
• Make sure that the rated voltage and
type of power on the rating plate agree
with the voltage and the power of the lo-
cal power supply.
• This appliance is supplied with a mains
cable without plug.
• The yellow-green earth wire should be
2-3 cm longer than all other cables.
• Any electrical component must be instal-
led or replaced by the After Sales Service
technician or qualified service personnel.
• Always use a correctly installed shock-
proof socket.

Environment concerns

The symbol
on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
human health, which could otherwise be
caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please
contact your local council, your household
• Built-in ovens and built-in cooking surfa-
ces are fitted with special connection sys-
tems. For safety reasons, you must only
combine appliances from the same man-
ufacturer.
• Do not use multi-way plugs, connectors
and extension cables. There is a risk of
fire.
• Make sure that the mains plug is accessi-
ble after installation.
• Do not pull the mains cable to disconnect
the appliance. Always pull the mains
plug.
• Connect the appliance to the mains using
a device that allows to disconnect the ap-
pliance from the mains at all poles with a
contact opening width of at least 3 mm,
eg. automatic line protecting cut-out,
earth leakage trips or fuse.
This appliance complies with the E.E.C. Di-
rectives.
waste disposal service or the shop where
you purchased the product.
Packaging materials
The materials with the symbol
clable. Dispose the packaging in a suitable
collection containers to recycle it.
17
are recy-

Publicité

Table des Matières
loading

Table des Matières