Learning - Beeper Speed FX8-G2-6 Manuel D'installation & D'utilisation

LEARNING

PRESENTATION OF ORDERS
Refs : FX8
Refs : FX10
Battery level
• Press the ON / OFF button on the display of your scooter for a few seconds to turn it on or off
• To change speed, short press the "M" button
Refs : FX11
Activation feux LEDs
Simple switching or
• Press the ON / OFF button on the handlebars of your scooter for a few seconds to turn the display on or off
• To change speed, short press the + or - button
• Short press the ON / OFF button to turn on the lights.
* Short press on M to switch from single motor to double motor (only available for refs. FX11-7 and FX11-10)
FIRST STEPS
1. Press the ON / OFF button on your scooter for a few seconds.
2. Place one foot on the platform, then kick-start your scooter with the other foot.
3. When you have enough momentum, place the second foot on the platform.
4. Select your speed and lightly press the accelerator.
5. Press the accelerator to move forward.
6. Apply the brakes to slow down.
7. Once your scooter has stopped, you can get off and turn it off.
REMOTE CONTROL (only ref. FX10)
Unlocking Remote activation
Locking
Alarm
Mileage
"Walk" function
Walk
Error codes
Error
double motor *
Selected report
km/h
km
M
Assist
Eco
STO
Selected report
Turbo
KM/h
Speed km/h
Battery level
ODO Trip Remain Max AVO
Lock the scooter.
In the event of theft, the alarm sounds and the rear wheel
locks
Unlock the scooter.
Activate the alarm remotely. Press again to stop the alarm
Double tap to turn on your scooter remotely. Press
off the scooter.
27
Speed km/h
ON/OFF button
Speed selection
Mileage
to turn