Display Settings - Beeper Speed FX8-G2-6 Manuel D'installation & D'utilisation

DISPLAY SETTINGS

You can configure certain options on your scooter via your display. Attention, these operations must be done with
precaution because they affect the internal settings of the scooter.
&
Press ON / OFF and M at the same time. Once the menu displays P1, click on the ON / OFF button to change the
parameter. To modify the data, press M.
P02: Distance unit
0: Kilometers
1: Miles
P04: Standby
0: The scooter never goes to sleep
From 1 to 60: In minutes, the time elapsed before the scooter goes to sleep
P09: Starting the scooter with or without impulse
0: Off
1: On
P12: Starting power from 0 to 5
0: Very low
1: low
2: Medium
3: Strong
4: Very strong
5: Powerful
P16: Cruise control
0: Off
1: On
To activate the option, keep the throttle trigger actuated at the same speed for 3 seconds,
an indicator light comes on to let you know that the regulator is on. To deactivate it, simply brake or accelerate.
The other parameters MUST NOT be modified under any circumstances, otherwise the complete configuration of the
scooter may be disturbed.
Press "M" for 3 seconds to enter the settings. Using the + and - buttons, change the parameter or function. Short press
"M" to change setting.
P02: Distance unit
0: Kilometers
1: Miles
P1 - Access to other parameters
Access to other settings is secure. You must enter the password 1159 (same for all references) to enter the system
settings. Use the + and - buttons to select the number, press the on / off button to change the number. After entering
password 1159, press M button to enter system settings.
P2: Activate or deactivate the password request when starting the scooter
ON: Activate the password request
OFF: Deactivate password request
29