Tool Overview; Safety Precautions - Storch Quick Mixx 25 Mode D'emploi

Tool overview

2
1
1 Gear selector switch (for Quick Mixx 50)
2 On/off switch with stop
3 Tool holder
4 Speed adjuster
5 Mixing coil (optional)
No pic- Assembly key (supplied)
ture

Safety Precautions

4
Caution!
3
Caution!
5
the use for which it is designed. Failure to observe
these instructions can damage the device or lead to
injury. Do not alter the tool in any way.
Check the tool before each use.
•
•
•
•
Handle with care. Keep the tool clean to ensure opti-
mum safety and performance.
Caution!
During operation:
• There may be dust when mixing dry goods.
For health and safety reasons the working area
should be well ventilated and the user should
always wear a mask and safety goggles. Please
observe the safety instructions issued by the ma-
terial producer.
• Do not wear wide clothes, scarves or jewellery
(rings, watches). These could get caught up in
the moving parts. Wear protective gloves.
40
Look for this symbol to point out impor-
tant safety precautions. It means AT-
TENTION!!!
Your safety is involved.
Please read and observe all operating
and safety instructions. Before starting
up the device please read the operating
instructions in full to ensure safe opera-
tion. Observe all safety advice, and dan-
gers and warnings. Only use the tool for
Check moving parts are properly connected
Switch the on/off switch to off before plug
ging in
Check to ensure no cables are damaged.
Check to ensure there are no broken parts.
• Never use near fl ammable liquids,
steam or gas.
• Protect from damp and rain.