HQ Power PROMIX30 Notice D'emploi page 4

4. Device Layout
a. Top Panel
1. Microphone volume control
2. Microphone high tone control
3. Microphone low tone control
4. Microphone selection switch:
AUTO (talkover),
ON (microphone always on),
OFF (microphone always off).
5. PH1/LN1 - LN2 selection switch
6. Channel 1 fader
7. Master level stereo VU LED meter
8. Channel 2 fader
9. PH3/LN3 - LN4 selection switch
10. Power switch
11. Master output level control
12. Headphones volume control
13. CUE (1 channel, cf #16) or PAN (live output) selector for headphones
14. 6.35mm microphone input on front side of device
15. Channel 1 / 2 crossfader
16. Channel 1 / 2 cue selection switch
17. 6.35mm headphones output on front side of device.
b. Rear Panel
18. Fuse holder for fuse F 0.5A / 250V (5 x 20mm)
19. Power cord
20. Voltage input selection switch: select the correct input voltage for your country.
21. REC stereo RCA output
22. MAIN stereo RCA output
23. PHONO3/LINE3 selection switch
24. PHONO1/LINE1 selection switch
25. PHONO3/LINE3 stereo RCA input
26. LINE4 stereo RCA input
27. PHONO1/LINE1 stereo RCA input
28. LINE2 stereo RCA input
PROMIX30_v2
4
VELLEMAN