4.4 Movable shelves
The walls of the refrigerator are
equipped with a series of supports so
that the shelves can be positioned as
desired.
4.5 Ice-cube production
This appliance is equipped with one or
more trays for the production of ice-
cubes.
1. Fill these trays with water
2. Put the ice trays in the freezer
compartment.
4.6 Positioning the door
shelves
To permit storage of food packages of
various sizes, the door shelves can be
placed at different heights.
5. HINTS AND TIPS
5.1 Normal operating sounds
The following sounds are normal during
operation:
• A faint gurgling and bubbling sound
from coils sound when refrigerant is
pumped.
• A whirring and pulsating sound from
the compressor when refrigerant is
pumped.
• A sudden cracking noise from inside
appliance caused by thermic
dilatation (a natural and not
dangerous physical phenomenon).
Do not use metallic
instruments to remove the
trays from the freezer.
To make these adjustments proceed as
follows:
1. Gradually pull the shelf in the
direction of the arrows until it comes
free.
2. Reposition the shelf as required.
The model is equipped with a variable
storage box which is fitted under a door
shelf compartment and can be slide
sideways.
• A faint click noise from the
temperature regulator when the
compressor switches on or off.
5.2 Hints for energy saving
• Do not open the door frequently or
leave it open longer than absolutely
necessary.
• If the ambient temperature is high
and the Temperature Regulator is set
to low temperature and the appliance
is fully loaded, the compressor may
run continuously, causing frost or ice
on the evaporator. If this happens, set
the Temperature Regulator toward
warmer settings to allow automatic
ENGLISH
7