AEG SCS51600S1 Notice D'utilisation page 16

16 www.aeg.com
Hb
17. Install the part (Ha) on the inner side
of the kitchen furniture.
18. Push the part (Hc) on the part (Ha).
19. Open the appliance door and the
kitchen furniture door at an angle of
90°.
20. Insert the small square (Hb) into
guide (Ha).
21. Put together the appliance door and
the furniture door and mark the
holes.
Ha
Hc
Hd
ca. 50 mm
90°
21 mm
90°
ca. 50 mm
21 mm
Ha
Hc
8 mm
Hb
22. Remove the brackets and mark a
distance of 8 mm from the outer
edge of the door where the nail must
be fitted (K).
8 mm
K
23. Place the small square on the guide
again and fix it with the screws
supplied.
24. Align the kitchen furniture door and
the appliance door by adjusting the
part (Hb).
Hb
25. Press the part (Hd) on the part (Hb).
Ha
Ha