AEG SCS51600S1 Notice D'utilisation page 13

separate earth in compliance with
current regulations, consulting a
qualified electrician.
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.
• This appliance complies with the
E.E.C. Directives.
8.3 Ventilation requirements
The airflow behind the appliance must
be sufficient.
min.
5 cm
2
200 cm
CAUTION!
Refer to the assembly
instructions for the
installation.
8.4 Door reversibility
1. Loosen the upper pin and remove
the spacer.
2. Remove the upper pin and the upper
door.
3. Unscrew the pins (B) and spacers (C).
4. Remove the lower door.
5. Loosen the lower pin.
6. On the opposite side, install the
min.
2
200 cm
7. Install the lower door.
8. Refit the pins (B) and the spacers (C)
9. Install the upper door.
10. Tighten the spacer and tighten the
lower pin.
on the middle hinge on the opposite
side.
upper pin.
ENGLISH 13
C
B
C