Fini Coaxial PULSAR/S 362/100 Mode D'emploi Et D'entretien page 29

with the help of the suitable detachable sheet fitted between the compressor unit and the
tank connection sheet. Screw the plug A and continue as indicated above.
Change the oil or top up always when the compressor is still warm.
Poor oils are not recommended,since they may have unsuitable lubrication properties.
Recommended oils
SHELL Rimula D Extra 15W-40
AGIP Dicrea 100
BP Energol CS100
ESSO Exxc Olub H150
MOBIL Rarus 427
OIL SHOULD ALWAYS BE DISPOSED OF IN COMPLIANCE WITH CURRENT LAWS.
Later maintenance
• Every 6 months
It is recommended to clean all compressor finned parts for
an efficient cooling system and therefore a higher machine
performance.
• Each year
Change the filtering element.
• Each two years
1. Check and clean delivery and suction valves.
2. Check for proper conditions of the non-return valve and
change the gasket A, if necessary (fig. 9).
In these cases, it is recommended all seals be changed.
Tel. 071 918 60 60
4.MAINTENANCE
Never mix different types of oil together.
CALL AUTHORIZED BODY FOR ITS DISPOSAL.
Mail: info@prematic.ch
FUCHX Renolin 104L VG100
API CM-8X
CASTROL Aircol PD100
IP Calatia Oil ISO 100
TOTAL Dacnis P100
9
A
www.prematic.ch
9