Use of the Instruction manual
This manual is integral part of this compressor and should be kept for its whole working
life.
Keep this manual in a safe place so not to damage it.
If the compressor is sold to a third party, also give the Instruction Manual to the new Owner.
This manual should be carefully read before starting the compressor up and in case of any
doubt on its operation.
This manual contains important safety information on operation procedures, which should
be complied with, otherwise injuries to people or damages to the machine might occur.
Important use and maintenance instructions are also mentioned in this manual.
Should this manual be lost, please ask for a new copy
Spare parts list is not considered as integral part of this manual, since it is available at
authorized dealers' offices only.
Symbols
The following symbols are used for especially important information:
Caution
Highlights precautions to be taken to ensure safety of the operator, people in the
compressor working area and the compressor.
Notes
Highlights recommended instructions or precautions to be taken to have an easier
maintenance procedure or to explain most important instructions.
Specialized personnel
Every intervention highlighted by this symbol is exclusively the job of a specialized
technician.
Technical Assistance
Use only genuine spare parts for servicing the compressor.
Non-genuine spare parts might cause injuries to people. For efficient Technical Assistance,
please always state model, type and part number of Your compressor. Those data are
specified both on compressor plate and label on manual cover page.
Product identification
Manufacturer's data
TYPE = name
CODE = compressor code
SERIAL NO. = serial number
Air delivered (l/min) and (cfm)
Technical data:
voltage (V/ph/Hz)
absorption (A)
power (HP and kW)
rotations per minute (Rpm).
Tel. 071 918 60 60
FOREWORD
1
3
4
6
3
Mail: info@prematic.ch
2
5
7
www.prematic.ch
CE mark
year
of manufacture
max. pressure
(bar and PSI)
noise level
dB(A)
other
approvals