Fini Coaxial PULSAR/S 362/100 Mode D'emploi Et D'entretien page 25

Standard accessories
The compressor is supplied with the following accessories:
a) anti-vibrating element or pivoting wheel (50-100-lt tank)
b) 2 wheels + assembly pins (50-100-lt tank)
c) box key (50-100-lt tank)
d) 4 plastic pivoting wheels (20-lt tank)
e) user's manual (all models)
f) oil dipstick (lubricated models)
Unpacking and Handling
This machine is supplied on a wooden pallet and protected
by a top paper cover.
1. Wear safety gloves and cut straps with scissors and withdraw the paper from the
machine top.
2. Hoist the compressor using a means with a suitable lifting power
3. Fit the wheels and/or the anti-vibrating elements.
Before accepting the delivery, check all machine parts and accessories are included
and for the perfect integrity of the machine. Possible objections will not be accepted
after delivery acceptance.
We recommend the package be kept so that it can be used again in case the compressor
is moved. Keep it for the warranty period at least. If needed, it will be easier and safer to
pack and send it to the service center. After this period, deliver the package to the authorized
organization for its disposal.
Compressor description
Compressor main components are
(fig.2):
1. Pressure switch
2. Line cock
3. Safety valve
4. Non-return valve
5. Compressor pump
6.Tank
Tel. 071 918 60 60
1.GENERAL INFORMATION
5
Mail: info@prematic.ch www.prematic.ch
1
2