Troubleshooting; Special Accessories; Exploded Drawing And Spare Parts List - Mafell S 35 M Traduction De La Notice D'emploi Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
7

Troubleshooting

Some of the most frequent defects and their causes are listed in the following chart. In case of other defects,
contact your dealer or the MAFELL customer service.
Defect
Decreasing extraction
performance
Dust extractor does not start
Dust extractor does not start when
the tool is switched on in >AR<
mode
PE-discharge and disposal bag is
sucked against the filters
Dust extractors class M or H: dust
in container despite fitted non-
woven filter
8

Special accessories

- Filter bag set non-woven 5 pcs
- PE-discharge and disposal bag 5 pcs
- 1 pair of folded filter cartridges (polyester nano-coated)
- 1 pair of folded filter cartridges (polyester)
- 4 m extraction hose LW21 machine connection Ø 35 mm antistatic
- 4 m extraction hose LW27 machine connection Ø 35 mm antistatic
- 5 m extraction hose LW35 machine connection Ø 35 mm antistatic
- 2.5 m extraction hose LW49 machine connection Ø 58 mm static
- 4 m extraction hose LW27 machine connection Ø 35 mm static
- Manual extraction set D35
- Reducing adapter Ø 58 / 35
9

Exploded drawing and spare parts list

The corresponding information in respect of spare parts can be found on our homepage: www.mafell.com
Danger
Determining the causes for existing defects and eliminating these always
requires increased attention and caution. Pull the mains plug beforehand!
Cause
Filter soiled
Non-woven filter full
Container full
Nozzle, tube or hose clogged
Power plug in socket outlet?
Mains de-energised?
Mains cable ok?
Cover closed properly?
Water sensor switched off?
Dust extractor in standby mode
"AR"?
Power plug of tool in device
socket outlet?
Wrong position rotary valve
Wrong position rotary valve
-25-
Elimination
Clean.
Change.
Empty.
Clean.
Set to "I" or "IR"
Put power plug in dust extractor
socket outlet
Drehschieber auf Position ● stellen
Set rotary valve to position ▲
Order No. 093719
Order No. 093721
Order No. 093720
Order No. 093674
Order No. 093679
Order No. 093684
Order No. 093681
Order No. 093682
Order No. 093680
Order No. 093718
Order No. 203602

Publicité

Table des Matières
loading

Table des Matières