Publicité
Les langues disponibles
Les langues disponibles
Memory
The telephone will store 4 one-touch and 10 two-touch memories for frequently
dialled telephone numbers.
When a number is stored in memory, you need only press one or two buttons
dependant on location to make a call. One-touch memories are numbered
M1-M4, two-touch memories are stored using the telephone keypad digits
Storing One-touch Memories
1. Lift the handset and press
2. Select a memory location (M1-M4) by pressing the corresponding button.
3. Enter the phone number to be stored (up to 21 digits).
4. Press
again.
P
5. Replace the handset. The number is now stored.
Dialing using One-touch Memories
1. Lift the handset and wait for a dialling tone.
2. Dial the desired number by pressing the corresponding memory location(M1-M4).
Storing Two-touch Memories
1. Lift the handset and press
2. Press
.
m
3. Select a memory location by pressing one of the keypad numbers
4. Enter the phone number to be stored (up to 21 digits).
5. Press
and replace the handset The number is now stored.
P
Dialing using Two-touch Memories
1. Lift the handset and wait for a dialling tone.
2. Press
.
m
3. Select the memory location where the number is stored by pressing the relevant
keypad number
Press
if you want a pause in the telephone number. If a stored number changes, enter the new
r
number in the location of the old one following the procedures above. For reference names or
numbers can be written on the memory index card.
www.doro.com
Settings
(ignore anything you hear in the earpiece).
P
(ignore anything you hear in the earpiece).
P
-
.
0
9
English
-
.
0
9
-
.
0
9
5
Publicité
