Troubleshooting; Malfunctions - Junker JC BC Série Manuel D'utilisation

Troubleshooting

Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
Troubleshooting
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist
▶
staff.
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced with a
▶
special connection cable, which is available from the manufacturer or his
Customer Service.

Malfunctions

Fault
The appliance is not work-
ing.
No displays light up.
The appliance is not cooling,
the displays and lighting
light up.
The LED lighting does not
work.
The refrigeration unit is
switching on more fre-
quently and for longer.
Cause
The mains plug has not been
inserted properly.
Fuse has been tripped.
The power has failed.
Showroom mode is switched
on.
Different causes are pos-
sible.
The appliance has been
opened frequently.
The exterior ventilation
grilles are blocked.
Troubleshooting en
Troubleshooting
Check whether the mains plug for
1.
the power cord is fully inserted into
the socket.
Check whether the appliance plug
2.
for the power cord is fully inserted
into the rear of the appliance.
Check the fuses.
▶
Check whether the power is on.
1.
Place ice packs (if available) on the
2.
frozen food.
"Carry out the appliance self-test."
▶
→ Page 49
a Once the appliance self-test has
ended, the appliance switches to
normal operation.
Call customer service.
▶
The customer service number can
be found in the enclosed customer
service directory.
Do not open appliance door unne-
▶
cessarily.
Remove any obstructions from in
▶
front of the exterior ventilation
grilles.
47